Tysen-kld

HIGH-VOLTAGE POWER CAPACITORS

Adopts Polypropylene Film Dielectric & PCB-free Insulation OilBetter Reliability & Longer Service Life

KLD series high-voltage power capacitors adopt the most advanced technical design, adopt the polypropylene film as the full-film dielectric, uses PCB-free dielectric oil with high safety and environmental protection performance as an impregnant. Each capacitor component has fuse protection and built-in discharge resistor.

KLD series high-voltage power capacitors is used to improve power factor, reduce line loss, and improve the quality of power supply.

Main Advantages

• Full-film dielectric • Wide applicable temperature range
• Very low loss of dielectric • Small deviation of capacity
• Low failure rate of capacitor • Long service life
• Light weight • High safety performance
• Insulating oil is nontoxic without pollution
• Built-in discharge resistors

Main Applications

  • It is used for PFC device to provide reactive power compensation, improve power factor, reduce line.

Structural Characteristics

  • Environment-friendly Insulation Oil
    As impregnant, the insulation oil has excellent dielectric properties, is completely biodegradable. It has good absorption ability to gas generated by partial discharge, high ignition point, excellent over-voltage endurance.

Structural Characteristics

  • Mixture of Special Gases in Insulation Oil
    The trace moisture of medium and impregnant is an important issue affecting partial discharge performance. This process enhances the partial discharge performance and voltage resistance performance and has better reliability and longer service life.
  • Design of Protruding Polar Plate
    The structure unit adopts design of protruding polar plate, can basically eliminate resistance loss.Interpolar medium polypropylene film with coarsening surface.
  • Structure of Edge-folded Aluminum Foil
    The edge of the aluminum foil of electrode adopts structure of edge-folded aluminum foil. The edge is in circular arc shape, improves field intensity distribution. It reduces loss of capacitor, reduces the probability of partial discharge of capacitor, so as to improve the insulation reliability of capacitor.

Technical Parameters

Rated Voltage 6~35kV,50Hz/60Hz Medium Structure polypropylene film, insulation oil
Over-voltage Range 1.1Un for long period,1.15Un for 30min,1.3Un for 5min,3Un for 1min
Over-current bility Long-term run (higher one can also be customized) Diectric Loss <0.2W/kvar
Capacitance Tolerance -5%~+5% Interpolar Voltage Resistance Under 2.15Un ,10-second AC voltage
Insulation Grade 3KV/40KV,6KV/60KV,10KV/75KV,20KV/125KV
Insulation Grade 20 years (under normal use) temperature Grade -40℃~+50℃ (or higher)
Protection Internal fuse (or external fuse) protection Coolingng Method Natural cooling (can adopt ventilation for cooling in cabinet)
Discharge Protection Built-in discharge device,<50V/5min(higher grades can be customized)
Loss Angle Tangent Value ≤0.0002 Executive Standard IEC 60871/EN60871,GB/T11024,VDE0560

Specifications & Models

6kV Single-phase Capacitors

Suitable for reactive power device Un=6.6/√3 kV with 6% resistance rate,over-current capacity of 1.5In

Capacitor Capacity (kvar) Models Overall Dimension (mm) System Voltage (kV)
Box Length L Box Width W Box Height H Lifting Bar D Porcelain Insulator Height t
50 KLD-MK6-H1-50-6KV 380 145 210 80 235 6
67 KLD-MK6-H1-67-6KV 380 145 240 80 235 6
100 KLD-MK6-H1-100-6KV 380 145 310 135 235 6
134 KLD-MK6-H1-134-6KV 380 145 380 135 235 6
150 KLD-MK6-H1-150-6KV 380 145 420 135 235 6
167 KLD-MK6-H1-167-6KV 380 145 450 135 235 6
200 KLD-MK6-H1-200-6KV 380 145 550 135 235 6
250 KLD-MK6-H1-250-6KV 380 145 660 135 235 6
300 KLD-MK6-H1-300-6KV 380 185 620 135 235 6
334 KLD-MK6-H1-334-6KV 380 185 680 135 235 6
350 KLD-MK6-H1-350-6KV 380 185 660 135 225 6
400 KLD-MK6-H1-400-6KV 380 185 740 135 225 6
450 KLD-MK6-H1-450-6KV 380 185 800 135 225 6
500 KLD-MK6-H1-500-6KV 380 210 810 135 225 6

Suitable for reactive power device Un=7.2/√3 kV with 12% resistance rate, over-current capacity of 1.5In

Capacitor Capacity (kvar) Models Overall Dimension (mm) System Voltage (kV)
Box Length L Box Width W Box Height H Lifting Bar D Porcelain Insulator Height t
50 KLD-MK12-H1-50-6KV 380 145 210 80 235 6
67 KLD-MK12-H1-67-6KV 380 145 240 80 235 6
100 KLD-MK12-H1-100-6KV 380 145 310 135 235 6
134 KLD-MK12-H1-134-6KV 380 145 380 135 235 6
150 KLD-MK12-H1-150-6KV 380 145 420 135 235 6
167 KLD-MK12-H1-167-6KV 380 145 450 135 235 6
200 KLD-MK12-H1-200-6KV 380 145 550 135 235 6
250 KLD-MK12-H1-250-6KV 380 145 660 135 235 6
300 KLD-MK12-H1-300-6KV 380 185 620 135 235 6
334 KLD-MK12-H1-334-6KV 380 185 680 135 235 6
350 KLD-MK12-H1-350-6KV 380 185 705 135 235 6
400 KLD-MK12-H1-400-6KV 380 185 730 135 225 6
450 KLD-MK12-H1-450-6KV 380 185 800 135 225 6
500 KLD-MK12-H1-500-6KV 380 210 810 135 225 6

* The dimension will be changed without prior notice and subject to actual delivered product .For more detailed technical information, please call Tysen-kld.

10kV Single-phase Capacitors

Suitable for reactive power device Un=11/√3 kV with 6% resistance rate,over-current capacity of 1.5In

Capacitor Capacity (kvar) Models Overall Dimension (mm) System Voltage (kV)
Box Length L Box Width W Box Height H Lifting Bar D Porcelain Insulator Height t
50 KLD-MK6-H1-50-10KV 380 145 210 80 305 10
67 KLD-MK6-H1-67-10KV 380 145 240 80 305 10
100 KLD-MK6-H1-100-10KV 380 145 310 135 305 10
134 KLD-MK6-H1-134-10KV 380 145 380 135 305 10
150 KLD-MK6-H1-150-10KV 380 145 420 135 305 10
167 KLD-MK6-H1-167-10KV 380 145 450 135 305 10
200 KLD-MK6-H1-200-10KV 380 145 550 135 305 6
250 KLD-MK6-H1-250-10KV 380 145 660 135 305 10
300 KLD-MK6-H1-300-10KV 380 185 620 135 305 10
334 KLD-MK6-H1-334-10KV 380 185 680 135 305 10
350 KLD-MK6-H1-350-10KV 380 185 705 135 305 10
400 KLD-MK6-H1-400-10KV 380 185 795 135 305 10
450 KLD-MK6-H1-450-10KV 380 210 810 135 305 10
500 KLD-MK6-H1-500-10KV 380 210 820 135 305 10

Suitable for reactive power device Un=12/√3 kV with 12% resistance rate, over-current capacity of 1.5In

Capacitor Capacity (kvar) Models Overall Dimension (mm) System Voltage (kV)
Box Length L Box Width W Box Height H Lifting Bar D Porcelain Insulator Height t
50 KLD-MK12-H1-50-10KV 380 145 210 80 305 10
67 KLD-MK12-H1-67-10KV 380 145 240 80 305 10
100 KLD-MK12-H1-100-10KV 380 145 310 135 305 10
134 KLD-MK12-H1-134-10KV 380 145 380 135 305 10
150 KLD-MK12-H1-150-10KV 380 145 420 135 305 10
167 KLD-MK12-H1-167-10KV 380 145 450 135 305 10
200 KLD-MK12-H1-200-10KV 380 145 550 135 305 10
250 KLD-MK12-H1-250-10KV 380 145 660 135 305 10
300 KLD-MK12-H1-300-10KV 380 185 620 135 305 10
334 KLD-MK12-H1-334-10KV 380 185 680 135 305 10
350 KLD-MK12-H1-350-10KV 380 185 705 135 305 10
400 KLD-MK12-H1-400-10KV 380 185 795 135 305 10
450 KLD-MK12-H1-450-10KV 380 210 810 135 305 10
500 KLD-MK12-H1-500-10KV 380 210 820 135 305 10

* The dimension will be changed without prior notice and subject to actual delivered product .For more detailed technical information, please call Tysen-kld.

Solutions

Tysen-kld